No products
Prices include tax.
Cart Checkout
The USB/RS485 converter allows to the PC computer the devices controlled via RS-485 interfaceATTENTION!On hardwares with many COM ports, it may be necessary to check the assigned COM port number. You can do it by: Device Manager -> Ports (COM and LPT). You can change the assigned COM port number using Device Manager...
Select to compare
Allows to sending data between computer and external device using RS-232 interface (eg SNIF-42)
RS-232 to RS-485 interface converter
The device is designed to wireless receive the data and transmit them via RS-485 2-wires lineUsing it together with the RS-485RF/P remote controller we can control the PAN/TILT/ZOOM/FOCUS functions of the speed dome cameras, and together with the RS-485RF/TX transmitter allows to send any RS-485 data with baud rates...
The Modbus RD-8 digital output module has 8 transistor outputsThe outputs can take two states: ground potential or power input potentialThe maximum load of a single output is 2AThe device is controlled by the Modbus RTU protocol over the RS-485 busThe free application allows you to control up to 4 modules
The device is designed to receive data from 2-wires RS-485 line and transmit them wireless to the RS-485RF/RX receiverUsing it together with PELCO keyboard controller, we can wireless control the motor unit/rotator connected via RS-485 interface to the RS-485RF/RX receiverThe connection is fully transparent, there...
The PFM820 controller enables switching the compatible cameras between systems: AHD, HD-CVI, HD-TVI, CVBSChange of the AHD / HD-CVI / HD-TVI / PAL standard is done with the corresponding button by keeping it pressed for approx. 5 seconds, without going into the OSD menuAttention!The device is designed for use only...
The ORS-8 allows to amplify the RS-485 signal from single transmitter (eg: DVR, control keyboard, PC computer) and split them to 8 independent RS-485 busses connected to the receivers (CCTV cameras)Device enables optical isolation among output buses and among output buses and input of the RS-485 signalThe basic...
The ORS-22 allows to connect RS-485 signal from two different transmitters (eg DVR, control keyboard, PC) and control two separate RS-485 buses connected to the receivers (CCTV cameras)Device enables optical isolation among output buses and among output buses and input of the RS-485 signalThe basic application of...
.Device enables quick access to the main functions, such as camera zoom and convenient 3D joystick control.Allows to control the most of camera models at direct mode (presets, routes, vectors control, etc.)..
Device enables quick access to the main functions, such as camera zoom and convenient 3D joystick controlThe keyboard is designed to use with HIKVISION recorders and PC softwareThe device has very small dimensions
Network keyboard with full possibilities of controlling and programming the PTZ camera heads of the BCS-SD seriesIt is also possible to control many DVRs from one keyboard
Network keyboard with full possibilities of controlling and programming the PTZ camera heads of the DH-SD seriesIt is also possible to control many DVRs from one keyboard