No products
Prices include tax.
Cart Checkout
Four pieces of screws to install the RACK 19\" cabinets equipment to the mounting rails
Select to compare
The cover plate to unused mounting hole in A19-FRAME mounting panel
The mount is used to install hanging RACK cabinet on wall
The panels bridge gaps between devices mounted in RACK cabinets
The FR-1 is fan cooler speed controller based on temperature, which allows to increase the lifetime of fan cooler and reduce the noise levelThe device is extra protected against reverse polarity connection of the power voltage
Mounting rail is designed to mount inside Rack 19\" cabinetsBy combining different rails in different ways, we can get the shelves for the devices incompatible with Rack standard
The fan is used for forced ventilation of devices placed in a RACK cabinet
The product allows to equip the Rack 19\" cabinets with various electronic devices according to individual needsDepending on the needs, you can mount in the A19-FRAME the equipment elements shown below as \"Components of working with\"
.Castors allow for easy movement of standing RACK cabinets.The wheel can be locked to secure the cabinet in the desired position..
The product allows to equip the Rack 10" cabinets with various electronic devices according to individual needsDepending on the needs, you can mount in the A10-FRAME the equipment elements shown below as \"Components of working with\"
The leg is used to level standing RACK cabinetsIt ensures stability of the cabinets with mounted devices
The panel allows to enter the cables to the devices installed inside RACK cabinet, ensuring protection of the free sockets against dust
The A19-TS-35/BL-4U mounting plate is designed for mounting devices compliant with DIN standard in the rear part of a Rack 19" cabinetThe connection of the rail with the plate ensures mechanical stability of the mounted equipment, plus the possibility of attaching the power and signal cables to the mounting plate
The frame is intended for mounting RACK devices directly on wallThe hinge on one of the sides ensures easy access to the devices from the rear without having to dismantle them from the frame, for instance to cables connections
The ZMB-1-800 panel is used for vertical mounting of devices on the side wall of a RACK cabinetIt is mounted on the front and rear RACK rails (left or right)Thanks to this, an unprecedented factor of filling the cabinet with this type of equipment has been achieved, while maintaining good access to devices, adequate...
The battery enclosure is designed to mount inside RACK 19" cabinetThe size of the enclosure allows to place in it the batteries: 4 x 7 Ah / 2 x 17 Ah