No products
Prices include tax.
Cart Checkout
Passive Power over Ethernet (PoE) adapter allows to power LAN devices through typical 4-pair twisted-pair cable (eg UTP)This solution enables Access Point powering, which is placed in hermetic box just by the antenna (to lower the loss in the RF cable), via twisted-pair cable from power source located inside a...
Select to compare
Inverter module decreasing the voltageThe DC/DC05-J device converts the input voltage to the 12V DC value
Inverter module decreasing the voltageThe DC/DC05 device converts the input voltage to the 12V DC value
Attention! If the power adaptor is using for continuous work (24H) the rated current of the adaptor should be less than 80% of the maximal currentPlease pay attention for proper cooling conditions of the power adaptor during work!
The LZ-1 is a passive device and allows to distribute the power supplyThe housing of the LZ-1 has been prepared for mounting with screws to a wall or with a tie to a mast (tie, screws - not included)For more devices than 8, the devices can be connected in parallel on the same terminal
Inverter module decreasing the voltageThe AD-DC/DC-06 device converts the input voltage to the 12V DC value
The hermetic power supply adapter with metal box, designed especially for LED / IR LED illuminators poweringAttention! If the power adaptor is using for continuous work (24H) the rated current of the adaptor should be less than 80% of the maximal currentPlease pay attention for proper cooling conditions of the power...
The Protec company switching adapter with splash-proof, aesthetic casingIt is designed to outdoor mount on the wall (for IP53 norm is recommended installing the device under a roof)The video and power connectors are placed without any problem inside adapter\'s casingThe adaptor should be correctly installed in...
.The PoE adapter is a module designed to supply CCTV devices operating in PoE 802.3at/af and Passive PoE standards...PoE power supply is available on one of the RJ-45 connectors (connector illuminated with a LED).The second RJ-45 connector is used to connect to the LAN..
The LZ-1S is a passive device and allows to distribute the power supplyThe housing of the LZ-1S has been prepared for mounting with screws to a wall or with a tie to a mast (tie, screws - not included)For the greater amount of devices than 5, the devices can be connected in parallel on the same terminal. You should...
The hermetic power supply adapter with metal box, designed especially for LED / IR LED illuminators poweringAttention! If the power adaptor is using for continuous work (24H) the rated current of the adaptor should be less than 80% of the maximal current
Hermetic power supply in a metal boxAttention! If the power adaptor is using for continuous work (24H) the rated current of the adaptor should be less than 80% of the maximal current
Hermetic power supply in a plastic housing, designed in particular for powering LED / IR LED illuminatorsAttention! If the power adaptor is using for continuous work (24H) the rated current of the adaptor should be less than 80% of the maximal currentPlease pay attention for proper cooling conditions of the power...
Attention!Plus power (+) is located inside the plug while the power minus (-) outside