No products
Prices include tax.
Cart Checkout
Passive Power over Ethernet (PoE) adapter allows to power LAN devices through typical 4-pair twisted-pair cable (eg UTP)This solution enables Access Point powering, which is placed in hermetic box just by the antenna (to lower the loss in the RF cable), via twisted-pair cable from power source located inside a...
Select to compare
Switching adapter, it is designed to powering IP devices using PoE technologyPower adapter is not compatible with IEEE 802.3af standardAttention! If the power adaptor is using for continuous work (24H) the rated current of the adaptor should be less than 80% of the maximal currentPlease pay attention for proper...
The POE-802.3AT/24 allows to supply the devices with DC 12VAttention! If the power adaptor is using for continuous work (24H) the rated current of the adaptor should be less than 80% of the maximal currentPlease pay attention for proper cooling conditions of the power adaptor during work!
The AWZ-613 adapter is a device, which enables easy way to powering up to 4 devices using twisted-pair cableAttention!The device is designed to operating in 10/100 Mb/s networksThe product is not compatible with Gigabit Ethernet network, where all the pairs of cable are used to data transmission
The POE-802.3AF allows to supply the devices with DC 12V
The POE-UNI/4 adapter is a device, which enables easy way to powering up to 4 devices using twisted-pair cableThe device is perfect to work with buffered power adapters, is equipped with DC power socket and PoE socket (power source selection by jumpers configuration)
The POE-802.3AF/C allows to supply the devices with DC 12VAttention! If the power adaptor is using for continuous work (24H) the rated current of the adaptor should be less than 80% of the maximal currentPlease pay attention for proper cooling conditions of the power adaptor during work!
.The PoE adapter is powered from the PoE 48V line and reduces the voltage to 24V at the RJ45 output.The basic use of the adapter is to power WiFi devices that require stabilized PoE 24V voltage...The device can be powered from the 802.3af or PoE PASSIVE switch..
.The PoE adapter is powered from the PoE 48V line and reduces the voltage to 12V at the 2.1 / 5.5 mm output.The basic use of the adapter is to power IP cameras or other devices that do not have the power supply compatible with the PoE standard...The device can be powered from the 802.3af or PoE PASSIVE switch..
The POE-48/NX is designed to powering devices using PoE technologyThis technology allows to run the system with only one UTP/FTP cable which transmits data and provides supplying voltageAttention! If the power adaptor is using for continuous work (24H) the rated current of the adaptor should be less than 80% of the...
The INSTANT-802.3AF/IN adapter allows to adjust the PoE 802.3af network power supply voltage to the requirements of the Ubiquiti network devicesDevice is designed to work indoors
The SPT-1/1P is designed to powering devices using PoE technologyThis technology allows to run the system with only one UTP/FTP cable which transmits data and provides supplying voltageAttention! If the power adaptor is using for continuous work (24H) the rated current of the adaptor should be less than 80% of the...
The INSTANT-802.3AF/OUT adapter allows to adjust the PoE 802.3af network power supply voltage to the requirements of the Ubiquiti network devices
.The INS-3AF-O-G adapter allows to adjust the PoE 802.3af network power supply voltage to the requirements of the Ubiquiti network devices..
Switching adapter, it is designed to powering IP devices using PoE technologyAttention! If the power adaptor is using for continuous work (24H) the rated current of the adaptor should be less than 80% of the maximal currentPlease pay attention for proper cooling conditions of the power adaptor during work!
The PFT1300 allows to increase the distance of PoE supply and data sending via UTP category 5e up to max. 200 mThe cascade connection of 2 extenders allows to send the data and powering up to 300 mAttention!The device does not require external power supplyThe PFT1300 can operate only with PFT1200
.The TAM01GT01GT-75 is designed to powering devices using High PoE technology...The device has implemented "midspan" function, which allows to install it between switches not equipped with PoE ports and network devices (for example IP cameras or Access Points), which have to be powered via UTP..